Table of Contents
Advertisement
are available under Pen- and Handsetting-menu, also located in the Hardware and Sound
menu.
For calibration purpose we suggest to install the calibration tool
„Win7,Win8_calibration_TOOL" which is available on faytech´s Driver DVD or at
www.faytech.com, Service, Driver.
For Win7, Win8 please just install the available drivers when you want to use Touch without
the gestures support as sole mouse alternative.
In the following, a Windows XP installation is described.
1. Put the DVD into your DVD- ROM.
2. Use the Explorer on the DVD and select the appropriate subdirectory (Touch Driver, then
the right operation system) to open the installation file setup.exe directly. Now you will see the
following window:
Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. If a security warning
pops up, click "Run", "Continue" or "Execute". Under Vista you must confirm the UserAccount
Control with "Continue". Some further warnings may be given depending on installed security
programs. Always click the button to continue the operation.
To complete the installation with all default options, click "Next" on each of the following dialog
boxes. You can cancel at any time. To switch back to a previous step, click the "<back" button.
Please note! The installation process is in English. Later on you can choose the language for
the OSD.
3."Welcome to the InstallShield Wizard for TouchKit":Press "Next" if you to continue the
installation.It's advisable to close all other programs before beginning this installation.
4."Setup Type"：
Check the box (see the picture on the next page upper left) only if you want to install the
PS/2-Driver. Usually for a USB-touch display, you should NOT select this option. The
13
Advertisement
Table of Contents
