Operation - Poulan Pro 545186848 Instruction Manual

KNOW YOUR HEDGE TRIMMER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
HEDGE TRIMMER ATTACHMENT. Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual for future refer-
ence.
Blade
BLADE
The BLADE is designed to cut hedges.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
Edger . . . . . . . . . . . . . . . . . . . . .
Cultivator . . . . . . . . . . . . . . . . . .
Blower . . . . . . . . . . . . . . . . . . . .
Pruner . . . . . . . . . . . . . . . . . . . .
Pruner . . . . . . . . . . . . . . . . . . . .
Brushcutter* . . . . . . . . . . . . . . .
*not designed for use with electric powerheads
WARNING:
Always disconnect pow-
erhead spark plug (or disconnect powerhead
from power source) before removing or instal-
ling attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or installing at-
tachments, place the powerhead and attach-
ment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.

OPERATION

Angle Adjustment Track
Fixed Screw
ANGLE ADJUSTMENT HOLDER
The ANGLE ADJUSTMENT HOLDER
used to adjust the angle of the hedge trimmer
to suit the area you are trimming.
Coupler
Lower
MODEL:
PP1000E Attachment
PP2000T
PP3000B
PP5000P
PP5500P
PP4000C
2. Press and hold the locking/release button.
Locking/Release
Button
Lower Attachment
3. While securely holding the upper shaft,
pull the attachment straight out of the cou-
pler.
5
Angle
Adjustment
Holder
Shaft
Upper Shaft
LOOSEN
TIGHTEN Knob
Coupler
Upper Shaft
is