Hasselblad 503CW Instruction Manual page 15

5) Insert the tongue of the backing paper
into the slot in the take-up spool.
-
6) Turn the grooved knob GW until the
arrow on the paper backing is aligned
opposite the triangular index on the
spool clamp bar, but no further.
El
IQ
7) Turn the film holder key G-CW and insert the film hold_
er into
1!he ryag1zine. Ensure that it is correctly posi_
tioned. Turn the film holder key cw to lock the film hold_
er in the magazine and then fold the key back into place.
8) Fold out the film crank and rotate it GW about ten turns
until it stops. Then turn it C-GW and fold it in. The fisure
(1) will now be displayed in the automatic frame_couiter
window indicating that the magazine is loaded and ready
for use.
The magazine's film winding crank is only blocked at
fram_e 1. A partially exposed film may be wound off at
any frame after that.
Magazine Operation
11