Passive professional subwoofer Safety instructions • Keep this manual for future reference. • When cutting the mounting hole for the loudspeaker, make sure there is sufficient clearance behind the • panel (no obstructions like A/C channels, power lines etc). • Take care of your loudspeaker wires, they should be free of damage.
SUBLIME subwoofer in an active loudspeaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. You can use it lying flat on the floor, hide it under a bench, behind the curtains, or even mount it on the wall using the included wall mounting brackets.
The product must be returned in the original packaging with the proof of purchase by an Apart Audio authorized reseller. The general terms and conditions can be found here: http://www.apart-audio.com/conditions/General_Terms_and_Conditions_...
Page 7
SUBLIME Instruction manual Mounting and positioning the subwoofer We recommend to use the subwoofer mounted on a solid wall. Special mounting brackets are included. Please note that the subwoofer outputs, these are the two holes on the side, can be placed in left or right position.
Page 8
LEFT RIGHT TO THE TO THE NOT OK NOT OK HOW TO INSTALL THE SUBTILE ON THE WALL WITH THE 6 INCLUDED BRACKETS HOW TO INSTALL THE SUBTILE ON THE WALL WITH THE 6 INCLUDED BRACKETS SUBLIME subwoofer SUBLIME subwoofer...
Page 9
BASS OUTPUTS POSITIONED RIGHT TO THE NOT OK HOW TO INSTALL THE SUBTILE ON THE WALL WITH THE 6 INCLUDED BRACKETS SUBLIME subwoofer 4. Position the speaker template at the speaker-side and mount 3 brackets on the speaker with the short screws.
Page 10
Passive professional subwoofer 5. Hook the loudspeaker on the wall 6. Push downwards until the loudspeaker is fixed firmly. Allow some tolerance and suspension to avoid vibrations into the wall. 7. position the logo into the correct direction...
Page 11
SUBLIME subwoofer. SUBLIME subwoofer. Connect the left satelite Connect the right satelite loudspeaker to the left loudspeaker to the right output of the SUBLIME output of the SUBLIME subwoofer. subwoofer.
Page 12
Passive professional subwoofer Bass ports Do not block the bass ports at the side of the loudspeaker...
SUBLIME Instruction manual Corner mounting Do not block the bass ports at the side of the loudspeaker. Keep at least 10 cm of free space between the ports and the adjacent wall.
Passive professional subwoofer Technical drawing Technical specifications model name SUBLIME-BL / SUBLIME-W woofer size 6.5 inch loudspeaker system dual coil woofer cone material coated paper nominal impedance 8 ohms frequency range 50 – 200 Hz low impedance dynamic power 2 x 80 watts...
Page 16
Apart Audio nv Industriepark Brechtsebaan 8 bus 1 2900 Schoten - Belgium Company names, product names and trademarks are property of their respective owners. Apart-Audio specifications are subject to change without notice.
Need help?
Do you have a question about the SUBLIME and is the answer not in the manual?
Questions and answers