4 – Commissioning the 9900TS Terminal Station
–
4.1
Purpose
The purpose of this task is to carry out:
–
site adjustment of the RT unit (also called RT or RT radio),
–
initialization and configuration of the RT unit and NT unit parameters,
–
checking and validation of the installed parameters before rendering the equipment operational.
–
4.2
Commissioning the RT unit
4.2.1 – Equipment required
To configure the parameters and carry out site adjustment of the RT unit, the following equipment is required:
–
the RT unit,
–
the RIT tool (Radio Installation Tool),
Potentiometer
Field Gauge
3CC11095AAAA TQ BJA 02
Alarm indicator
On/Off switch
Receiving indicator
N connector to
NIT tool
Figure 33 – RIT tool
Issue 02 - January 04, 2000
PC and headset
cable connector
On/Off indicator
Rear view
BNO connector
N connector to
to RT unit
Front view of equipment in
transport pouch
RT unit
45/68