Roland G-70 Service Notes page 26

Note : if the switch test has been carried out previously, you may exit pressing MENU
and EXIT at the same time.
2- LED COLOR CHECK
Press the USER PROGRAM 2 button, the display shows:
Action:
If you press the USER PROGRAM 1, all the RED LED buttons will light;
If you press the USER PROGRAM 2, all the GREEN LED buttons will light;
If you press the USER PROGRAM 3, all the BLUE LED buttons will light;
If you press the USER PROGRAM 4, all the two-colour (ORANGE) LED buttons will light;
If you press the USER PROGRAM 4, all the LED buttons will light;
Please refer to the following chart:
LED COLOUR
STYLE CONTROL SECTION
MARK & JUMP SECTION
(AROUND THE DISPLAY)
GREEN NO.: 21
-
TIPE MODE SECTION
KYB. PART TONE ASSIGN SECTION
(AROUND THE DISPLAY)
BLUE NO.: 2
V- LINK SECTION
TWO-COLOUR STYLE CONTROL SECTION
ORANGE NO.: 2 RECORDER
RED NO.: 101 REMAINING LEDS
To exit press the EXIT button.
LED TEST
******
1. ALL RED LED ON
2. ALL GREEN LED ON
3. ALL BLUE LED ON
4. ALL MULTICOLOR LED ON
5. ALL LED ON
Press EXIT to MENU .
BUTTONS' NAME
SECTION
******
(INTRO - NAIN - END / RIT)
(FROM NO.: 1 BUTTON TO NO.: 4)
(LYRICS & SCORE - EFFECTS - DISK & MIDIA – COVER
MAKEUP TOOLS - MENU)
(CHORUS - PAN POT)
(MBS - LW 2 - LW 1 - UP3 - UP2 - UP 1)
(MUSIC ASSISTANT)
(V-LINK)
(START/ SOP)
(PLAY/ SOP)
G-70
31