Advertisement

IMPORTANT NOTICE
Before operating the unit, please read these instructions carefully.
Retain the manual for future reference.
You are advised to follow the instructions carefully when operating the unit.
Do not use any chemical solvent, clean agent or corrosive detergent to clean away dirt of the surface of the screen. By doing so, you
may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend the use of a soft
damp lens cleaning cloth.
Using spare parts from another manufacturer may caused permanent damage to the unit.
When operating the display unit, avoid touching or pressing the LCD glass panel. Excessive force may cause irreparable damage to
the LCD screen.
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a screen that is located in the motor
vehicle at any point forward of the back of the driver's seat, or that is visible, directly or indirectly, to the driver while operating the
vehicle. In the interesting of safety, this monitor should never be installed where it will be visible, directly or indirectly, by the operator
of the motor vehicle.
Lock the LCD screen in the fully closed position when not in use.
Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome
lights can drain the vehicle's battery.
SDM107 / SDM185 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDM 107 and is the answer not in the manual?

Questions and answers

Summary of Contents for Myron & Davis SDM 107

  • Page 1 IMPORTANT NOTICE Before operating the unit, please read these instructions carefully. Retain the manual for future reference. You are advised to follow the instructions carefully when operating the unit. Do not use any chemical solvent, clean agent or corrosive detergent to clean away dirt of the surface of the screen. By doing so, you may cause irreversible damage to the surface of the TFT screen.
  • Page 2: Main Features

    1 AUDIO/VIDEO OUTPUT FULL FUNCTION WIRELESS REMOTE CONTROL (OSD) ON SCREEN DISPLAY FOR CONTROL OF PICTURE QUALITY AND FUNCTIONS DOME LIGHTS MAIN SPECIFICATIONS SDM 107 SDM 185 DISPLAY: 10.2” wide screen TFT LCD active matrix 8.5” wide screen TFT LCD active matrix...
  • Page 3: Dvd Player

    DVD PLAYER Supports DVD, SVCD, VCD, AUDIO CD, MP3 and MPEG video, JPEG and BMP format. MEDIA PLAYER Support USB Drive: Equipped with USB Socket. Plays MPEG1 and MPEG2 format movies. (JPEG、AVI、BMP) Plays MP3 music. Applies to NTSC or PAL system. STANDARD ACCESSORIES PACKAGE CONTENTS Remote control (CR2025 x 1 Lithium Battery) Operating manual...
  • Page 4: Controls And Connectors

    CONTROLS & CONNECTORS POWER button: Press to turn the monitor on/off. MENU button: Press menu button to active OSD feature and select OSD features UP/DOWN buttons: Adjustment buttons IR Sensor: IR sensor for remote control Dome lights: Provide additional interior illumination Dome lights switch: From front to rear OFF / AUTO / ON USB port:...
  • Page 5: Monitor Function Descriptions

    MONITOR FUNCTION DESCRIPTIONS MUTE button Press to mute the audio, press the button again to restore sound to the previous audio level. MENU button Press this button to active the OSD menu screen MENU Adjust Up button MENU Adjust Down button Use this button to change the value of the menu option.
  • Page 6: Dvd Function Descriptons

    DVD FUNCTION DESCRIPTONS 10. NUMBER buttons Allows the user to enter the numbers 0 to 10 for selection of CD track, DVD chapters, and password setting. 11. PBC button Allows the user to select the subtitle when playing the VCD 2.0 version only. 12.
  • Page 7 23. STOP button DVD disc play will be stopped. 24. PAUSE button Allows the user to pause the playback. 25. ENTER button Press this button to confirm selection. 26. EJECT button Press this button to eject the DVD disc. 27. A-B button Allows the user to repeat play of a DVD or CD from point A to point B.
  • Page 8: Usb Drive Functions Descriptions

    USB DRIVE FUNCTIONS DESCRIPTIONS 32. REPEAT button Allows the user to repeat play. 33. SETUP button Press to enter the SETUP MENU MAIN PAGE 34. DISPLAY button Press to display the Media Card current information. 35. ZOOM button Allows the user to zoom in or zoom out the image, press the “LEFT/RIGHT UP/DOWN”...
  • Page 9: Monitor Operation

    MONITOR OPERATION Slide the screen release lock forward will unlock the LCD screen and the LCD screen will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. Press the POWER button on the unit or remote to turn on the monitor. Press the SOURCE button to select viewing source.
  • Page 10: Overhead Dome Lights

    OVERHEAD DOME LIGHTS The lights are controlled by a three pos ition slide switch. Sliding the switch to the ON position will turn the lights on. The OFF position will prevent the lights from turning on at all times, and the DOOR position will allow the lights to turn on and off with the vehicle’s interior lighting.
  • Page 11: Dvd Setting And Adjustment

    ADJUST DVD SETUP MENU VD SETTING AND ADJUSTMENT This chapter describes how to set and how to adju st using the on-screen SETUP menu. Using the Setup Menu Press the SETUP button to display the SETUP menu on the display screen. 〝...
  • Page 12: Display Setting

    D ISPLAY SETTING The DISPLAY SETUP allo ws you to adjust screen setting(aspect ratio) Press and then use the (▼▲) buttons to select the appropriate setting. 4:3/PS This display t he wide picture on the screen with a portion of the left & right side removed. :3/LB This di splay the wide picture with black bands on the...
  • Page 13: Parental Control

    PARENTAL CONTROL SETTING FOR RATING This section if the SETUP Menu allows to control the content of movie playback from No Adult to View All. The Parental Control function allows you to limit viewing to your preference. 1. Use the bittons to select from: ▼▲...
  • Page 14 AUDIO / MP3 CDs PLAYING AUDIO CDs When playing an audio CD, It displays the current track and time for that track playing. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: REP-ONE-repeats the track that is playing.
  • Page 15: Selecting Folders And Songs

    SELECTING FOLDERS AND SONGS When an MP3 disc is inserted in the player, the Sm art Nav screen appears automatically. You can change folders and songs through Smart Nav. The DVD player plays the songs in order they were burned on to the disc. If a disc is playing, press STOP.
  • Page 16: Photo Mode

    USB DRIVE OPERATION USB Socket AV Input Jacks Insert a USB Drive into the proper socket as shown on the above figure. Use caution when inserting Digital Media Card into the port. Press the DVD button on the remote control. CAUTION: USB Socket can be damaged if the wrong side is inserted or it is force in It will automatic reading files from USB.
  • Page 17: Other Information

    OTHER INFORMATION AME PORT INPUT Connect your Game A/V output to the A/V input jacks. Press the “SOURCE” button on the remote control to select the GAME mode. WIRELESS IR HEADPHONE TRANSMITTER This monitor includes a built in Wireless IR transmitter, for use with Myron & Davis wireless headphones (Part number:AE51). The volume can be adjusted using the controls on each headset.
  • Page 18: Troubleshooting

    LIMITED ONE-YEAR WARRANTY (NON-TRANSFERABLE) Myron & Davis warrants to the original purchaser a non- transferable warranty to repa ir or replace, free of charge, the video product(s) in materials and workmanship under normal use and conditions for a period of one (1) year from date of purchase. Limited warranty excludes: Labor cost for removal, reinstallation, and trouble shooting of the video product(s).
  • Page 19 tice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This de vice complies with Part 1 5 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference and This device must accept any interference received, including interference that many cause undesired operation.
  • Page 20 NOTES SDM107 / SDM185 20...
  • Page 21: Fcc Information

    FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This manual is also suitable for:

Sdm 185

Table of Contents