Related Manuals for Windchaser DT12M
Summary of Contents for Windchaser DT12M
- Page 1 PLEASE READ BEFORE USE AND SAVE Oscillating Table INSTRUCTION MANUAL Developers of Home Comfort Products.
- Page 2 This Parts and Assembly warranty applies only to the original purchaser of this product. WindChaser Products, Inc. will repair or replace this product if it is Operating Instructions found to be defective in material and/or workmanship. Defective product...
- Page 3 BEFORE INITIAL USE TROUBLESHOOTING Problem Remedy Read this Entire Instruction Manual Before Use. No Power Make sure the outlet is live Fan will not oscillate Pull up on the clutch knob. The Fan is unstable 1. Make sure the stand is firmly secured to the base.
-
Page 4: Important Instructions
OPERATING INSTRUCTIONS FOR YOUR SAFETY OPERATION IMPORTANT INSTRUCTIONS To turn on the fan, rotate the control knob clockwise to either of the three speed settings: (1) Low (2) Medium or (3) High. To turn the fan Read and save these important safety instructions before using this fan. When using electrical appliances, basic safety precautions should always be followed off, rotate the control knob counter-clockwise to (0). - Page 5 Step 2 PARTS Position the rear grill (5) by aligning the guide holes with the round pegs located on the motor housing (6). Screw on the grill lock nut (4) to secure the rear grill (5) to the motor housing (6). Step 3 Insert the fan blade (3) onto the motor shaft.