CONTENTS Remote Control Wall/Ceiling MODEL OCWR161 Before Initial Use For Your Safety Parts and Assembly Fan and Remote Controls Operation Maintenance and Cleaning Limited Warranty...
Read this Entire Instruction Manual Before Use! Thank You for Purchasing Your New WindChaser ® Product. For your reference: Serial No. Date of Purchase Name and Address of Dealer...
FOR YOUR SAFETY READ AND SAVE THESE IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Use fan only as described in this manual. Other uses not recommended may cause fire, electric shock or injury. 2.
PARTS Mounting Bracket Motor Base Setting Screw Power Cord Rotator Arm Rock Frame Motor Housing Cover Guard Ring Control Panel Blade Front/Rear Guard Blade Cap Guard Lock Ring Guard Mark Remote Control ASSEMBLY STEP 1: Plug the control panel cable into the motor base. (Arrow direction as figure) STEP 2: Assemble the receiver onto the motor base.
STEP 5: Mount the bracket onto the ceiling or wall using screw C STEP 6: Insert the fan motor base onto the mounting bracket and twist it STEP 7: Turn the set screw to secure the motor base to bracket. STEP 5 STEP 4 STEP 7...
OPERATING INSTRUCTIONS On/Off:1) The factory presets the fan to turn on at High speed and can be adjusted to the preferred setting. 2) After switching off the fan, the last function will be saved in the mem- ory. When switching on the fan, the operation will start at this saved function.
MAINTENANCE INSTRUCTIONS 1. Turn the Fan OFF and unplug the fan before cleaning. 2. Use only a soft, damp cloth to clean the fan. 3. Do not immerse the fan in water and never allow water to drip into the Motor Housing.
This warranty applies only to the original purchaser of this product. WindChaser Products, Inc. will repair or replace this product if it is found to be defective in material and/or workmanship. Defective product should be returned to the place of purchase in accordance with store policy.