4
Operation and care
NOTE
The unit is operated via the control panel
of the heating and heat pump controller
( operating manual of the heating and
heat pump controller).
4.1 Energy-conscious and
environmentally-aware operation
The generally accepted requirements for an energy-
conscious and environmentally-aware operation of a
heating system also apply when using a heat pump.
The most important measures include:
●
No unnecessarily high flow temperature
●
No unnecessarily high domestic hot water
temperature (note and follow local regulations)
●
Do not open windows with gap / tilt open
(continuous ventilation), but instead open wide for
a short time (shock ventilation).
●
Make sure that the controller settings are correct.
4.2 Care
Wipe down the outside of the unit only using a damp
cloth or cloth with mild cleaning agent (washing-up
liquid, neutral cleaning agent). Do not use any harsh,
abrasive, acid or chlorine-based cleaning agents.
5
Delivery, storage, transport
and installation
ATTENTION
Damage to the housing and the unit components due
to heavy objects.
► Do not place any objects on the unit which are
heavier than 30 kg.
8
5.1 Scope of supply
► Check delivery immediately after receipt for
► Notify supplier of any defects immediately.
The accompanying parts package contains
Package 1:
Package 2:
In façade package:
Subject to change without notice | 83059100aUK – Translation of the operating manual | ait-deutschland GmbH
externally visible damage and completeness.
●
3 flat seals 5/4"
●
4 flat seals 1"
●
1 tube lubricant
●
1 HT-bend DN 40mm 87°
●
1 protective cover for plug
●
4 EPP screws
●
2 screws M5x16, black for the front wall
●
15 screws for façade mounting M5x9
●
1 plastic louvre grille
●
1 heat pump blind cover
●
Swelling tape for louvre grille and blind cover
●
Documents (manuals, ERP data and label)
●
Type sticker