NOTE:
You may need to input the password for Wi-Fi connection. Please c
the default.
5. Wait a moment,
and then the client will connect to your device successfully.
Via USB Cable
1. Connect to the device.
2. Power on your device.
3. The OS detects and recognizes new hardware and finishes the installation automatically.
NOTE: If the system does not launch installation automatically, you can run the installation program in
path of My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to your device successfully.
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access the Internet in the
Automatic or Manual mode. The default mode is Automatic.
Mode
Automatic
Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
Your device will connect to the Internet automatically, and your
clients can surf on the Internet directly.
Log in the webGUI configuration page, and select Settings >
Network Settings > Network Selection > Manual (To change
current setting, please disconnect from network), then Apply.
VODAFONE R209-Z Quick Guide
heck the label on your device to get
Operations