Electrolux GA55GL201 User Manual page 27

Select and start a washing
programme
Select the washing programme and
delay start with the door slightly
opened. The start of the
programme or the countdown of
the delay start will occur only after
the closure of the door. Until then it
is possible to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the programme selection
button until the number
corresponding to the required
washing programme appears in
the digital display;
example: P1 - P2 - P3 etc...
(See 'Washing programmes' chart
for the number of the programme).
Programme selection button
indicator light is flashing.
The indicator lights of the phases
foreseen for the selected washing
programme are flashing.
5. If you want to set options please
refer to the 'Washing programmes'
chart to be sure that the options
are available with the selected
programme.
6. Close the dishwasher door, the
programme starts automatically.
Once the programme has started
the phase indicator lights will turn
off except for the phase under
way.
In the digital display is visible the
running time of the washing
programme.
The programme selection button
indicator light remains illuminated
with a fixed light.
Setting and starting the programme
with delay start
1. After having selected the washing
programme (and options), press
the delay start button until the
number of hours for the delay start
will appear in the digital display.
The commencement of the
selected washing programme can
be delayed from 1 to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically.
3. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
4. Once the delay start has elapsed
the programme will start
automatically.
Cancelling the delay start in
progress
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two buttons positioned over the
letter C, until 2 horizontal lines will
appear in the digital display.
daily use electrolux 27