Analog Trunk; Sip Trunk - Samsung IPX-G5X0 series Installation Manual

SAMSUNG IPX-G5X0 Installation Manual v1.0

Analog Trunk

If you have a FXO card configure Analog Trunks in the SCM Administrator at:
[Configuration – Gateway – IPX Setting – Gateway Analog Trunk]
Select the Gateway and press the Change button.
Select the slot you where your FXO card is installed.
Assign the created FXO Trunk Route to the Route Name.
Select other settings at this time, such as CID Receive Support and Ring Destination Number.

SIP Trunk

SIP Trunks are configured in the SCM Administrator at:
[Configuration – Gateway – IPX Setting – Gateway SIP Trunk]
The IPX-G5X0 Series supports up to 4 SIP carriers.
Note: SIP Servers must be entered as IP addresses. Domain Names are not supported at this time.
Mar 2016
13