Operation - ALDI MA 501-17 User Manual

1. Take the paper shredder out of the packaging.
2. Check whether the paper shredder or the individual parts exhibit damage.
If this is the case, do not use the paper shredder. Contact the manufacturer
at the service address specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).

Operation

NOTICE!
Risk of damage!
Incorrect handling with the paper shredder can lead to damage
to the motor or to the inner rollers.
− Avoid overloading the motor by not putting more than
6 sheets of paper (54 lbs or 80 g/m
same time.
− Do not shred formats larger than A4 (8.3" × 11.7") or
continuous paper.
− Unplug the device if the motor cuts out because of
overloading. Ensure that the slide switch is at OFF.
Leave the motor to cool for about 30 minutes to room
temperature, before you plug the shredder back in. You
can then continue with operations.
− Remove paper clips, staples and similar fixings before you
start shredding.
Short-term operation:
• The shredder is suitable only for short-term operation and
• The shredder motor switches off automatically if it overheats.
not for continuous use. After continuous operation of a
maximum of 1 minute, let the shredder rest for 30 minutes, to
prevent overheating of the device.
) into the slot at the
2
Operation
13