WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
First, connect power cord correctly.
1
And switch the AC power control switch on the TV.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the
the POWER, INPUT, CH
Select the viewing source by using the INPUT button on the remote control.
2
This TV is programmed to remember which power state it was last set to, even if the power
cord is out.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts to
standby mode.
NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
If you do not complete the Initial setting, it will appear whenever the TV is switched on until
the Initial setting procedure is completed.
If the TV is unplugged once or turn off with the AC power control switch on the TV, reset the
Clock function.
PROGRAMME SELECTION
1
Press the CH
VOLUME ADJUSTMENT
1
Press the VOL(+ or -) button to adjust the volume.
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, VOL(+ or -) button.
or NUMBER (0~9) button on the remote control.
or NUMBER buttons to select a programme number.
/ I, INPUT or CH
button on the TV or press