Command Reference List - LG M2080DF Owner's Manual

APPENDIX

Command Reference List

01. Power
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Control
Lock Mode
19. Channel Tuning
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID '0', every connected the TV
is controlled. Set ID is indicated as decimal (1~ 99)
on menu and as Hexa decimal (0x0~ 0x63) on
transmission /receiving protocol.
[DATA] : To transmit the command data.
T ransmit the 'FF' data to read status of command.
[Cr] : Carriage Return
ASCII code '0x0D'
[ ] : ASCII code 'space (0x20)'
* In this model, TV will not send the status during the standby
mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this
format when receiving normal data. At this time, if the data
is data read mode, it indicates present status data. If the
data is data write mode, it returns the data of the PC com-
puter.

COMMAND COMMAND
1 2 (Hexadecimal)
k a 00 to 01
x b ( p.119)
k c ( p.119)
k d 00 to 01
k e 00 to 01
k f 00 to 64
k g 00 to 64
k h 00 to 64
k i 00 to 64
k j 00 to 64
k k 00 to 64
k l 00 to 01
k m 00 to 01
DATA00
COMMAND COMMAND
1 2
(Hexadecimal)
physical
m a
program high
DATA
14. Treble
15. Bass
16. Balance
17. Color T emperature
18. Auto Configuration
20. Channel Add/Del
21. Key
22. Backlight
DATA01 DATA03
(Hexadecimal) (Hexadecimal)
major
major low
program low
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the '0', 'a'.
[DATA] : Use the small character, if data is 0 x ab, it will send the 'a', 'b'.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this
format when receiving abnormal data from non-viable func-
tions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the '0', 'a'.
[DATA] : Use the small character, if data is 0 x ab, it will send the 'a', 'b'.
[NG] : Use the large character
COMMAND COMMAND
DATA
1 2 (Hexadecimal)
k r 00 to 64
k s 00 to 64
k t 00 to 64
k u 00 to 02
j u ( p.120)
m b 00 to 01
m c ( p.121)
m g 00 to 64
DATA04 DATA05 DATA06
(Hexadecimal) (Hexadecimal) (Hexadecimal)
minor high minor low attribute