On/Standby
(power) light
Varies
Varies
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Related concepts
Air Filter and Vent Maintenance
Related references
Projector Setup Settings - Extended Menu
Optional Equipment and Replacement Parts
Related tasks
Stopping Video Action Temporarily
Viewing the Status Display
You can monitor the projector's status and view error information from the status display.
1. Turn on the projector.
2. Press the i button on the remote control or the right arrow button on the control panel.
Status
Laser
Temp light
light
light
Varies
Varies
Varies
Varies
Flashing
Varies
orange
Solving Problems
Filter
Status and solution
light
Flashing
A message to clean or replace the air
orange
filter is displayed; turn the projector
off, unplug it, and clean or replace
the air filter as necessary
Varies
The projector is unable to maintain
constant brightness and the
Constant Brightness setting in the
Settings menu is disabled
251