Onboard Device Function - JETWAY G03-NF95A-F Technical Manual

IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard drive supports block mode (most new drives do), select
Enabled for automatic detection of the optimal number of block read/writes per sector
the drive can support. The settings are: Enabled, Disabled.
Delay for HDD (Sec.)
The optional settings range from 0 to 15 seconds.
SATA Port Speed Settings
The optional settings are: Disabled; Force GEN I; Force GEN II.

3-7-2 Onboard Device Function

High Definition Audio
This item allows you to decide to enable/disable the chipset family to support HD
Audio. The settings are: Enabled, Disabled.
Onboard PCIE Lan Bootrom
Decide whether to invoke the boot ROM of the onboard LAN chip.
30