Configuring Multiple Spanning Tree Protocol - Cisco NCS 4200 Series Configuration Manual

Configuring Multiple Spanning Tree Protocol

Configuring Multiple Spanning Tree Protocol
Describes steps to configure MST
SUMMARY STEPS
1. configure
2. spanning-tree mode mst
3. spanning-tree mst configuration
4. instance vlan-id vlan vlan-range
5. name region
6. revision revision -number
7. end
DETAILED STEPS
Command or Action
Step 1
configure
Example:
Device> configure
Step 2
spanning-tree mode mst
Example:
Device> spanning-tree mode mst
Step 3 spanning-tree mst configuration
Example:
Device(config)#spanning-tree mst configuration
Step 4 instance vlan-id vlan vlan-range
Example:
Device(config-mstp-inst)# instance 1 vlan 450-480
Step 5 name region
Example:
Device(config-mstp)# name m1
Step 6
revision revision -number
Example:
Device(config-mstp)#)revision 1
LAN Switching Configuration Guide, Cisco IOS XE Everest 16.6.1 (Cisco NCS 4200 Series)
34
Multiple Spanning Tree Protocol
Purpose
Enters global configuration mode.
Enables MSTP configuration mode.
Enters the MSTP configuration submode.
Maps the VLANs to an MST instance
Sets the name of the MSTP region.
Sets the revision level of the MSTP region.