Selecting The Audio System - JMC Soundboard User Manual

Selecting the audio system

There is a broad range of audio amps available. We recommend a high-quality amp providing at least
2 x 60 W into 8 Ohms (for a transistor amp). Depending on your preferences, perhaps you will choose
RMS
a valve/tube amp which also creates a very pleasant rendering. It is worth nothing that with your
Soundboard, you have treated yourself to an extremely high-quality loudspeaker that is very transparent.
By going for a quality amp as well as cables and a source of correspondingly high quality (a good CD player,
non-compressed files), you will achieve an optimal rendering.
We are naturally available to provide any advice you might require in this respect and we represent
certain brands in Switzerland.
« Thank you very much for the quick delivery. Installing it was so simple that I did it myself:
with just four screws, the Soundboard was secured to the wall. The sound is incomparable
and fills the entire room, covering the entire spectrum from treble to bass notes. Complex
sounds are extremely accurate and detailed. All the delicate nuances of brass instruments are
admirably conveyed. The sound is clear, warm, pleasant and well-rounded. »
Page | 14 www.jmclutherie.com
Ch. S.