General System & Internet Settings; Synchronizing The Display With The Controller - Robo-Tank Basic User Manual

Robo-Tank DIY All-In-One Aquarium Controller User Manual

Synchronizing the Display with the Controller

Robo-Tank DIY All-In-One Aquarium Controller
General System & Internet Settings
From the home screen, press: Settings > System,
and you will see the SYSTEM SETTINGS screen, to
the left, where
settings for the controller, this includes the ability to
set the display brightness and auto-brightness
feature, restore default vales and sync the system.
There's also some settings and information for the
Local Network/Internet connection.
Sync System, top left corner, is used to sync the
display with the power bar. This is handy if you
disconnected the display from the power bar and
adjusted the settings. When you sync the system all
the settings in the display are sent to the power bar.
When you press: Sync System, on the screen above
left, you will get the SYNC SYSTEM screen, at left,
where you can sync the display and controller.
This is a step by step process, and when you press
YES you see a progress bar indicating the system is
syncing. Upon completion, it confirms sync has
completed, and you can exit.
This is handy if you disconnected the display from
the power bar and adjusted the settings. When you
sync the system all the settings in the display are
sent to the power bar.
Back to Top
you're able to adjust different
User Manual v4.05 – Page 57