Thank you for buying our Silent Witness Camera. This instruction manual contains information on the main functions of your Silent Witness Camera. Please read and understand these instructions prior to installing and operating this product. The contents of this manual are subject to change without user’s prior consent.
Page 3
Personal Data Protection Act and related law (statute). • Please use the authentic Silent Witness product/parts that we provide. We will not be held responsible for the breakdowns and accidents caused by the use of non-authentic Silent Witness products/parts.
Page 4
SD card. • If the Silent Witness camera is being used in a commercial application. We advise the company’s fleet manager to relay this information to the drivers. We recommend keeping a spare SD memory card in the vehicle so it can be swapped in the event of an accident.
Page 5
LIMITED WARRANTY STATEMENT: This Limited Warranty shall apply to the Silent Witness product. Parksafe Automotive Limited warrants the product from its authorised distributor will meet the applicable product specifications and be free from all defects in material and workmanship for an applicable period herein “Limited Warranty”.
Page 6
Product, force majeure, or the result of a repair by an unauthorised service provider, the Customer shall bear all expenses relating to shipping such a defective Product. 7. Parksafe Automotive Limited will return the repaired Product or another Product to the Customer in good working condition.
Page 7
Please take note of the following before using your new SW011 Dash Camera 1. Use the original car charger and hard wire kit provided. 2. Rotate the camera in the mount to right angle when fixed on the car windshield to get the correct angle of view.
Page 8
7. Over temperature protection. Because extreme temperatures can cause damage to the camera, the smart temperature adjustment within the camera will react when the parking guard function is in operation. When inner temperature reaches 85°C(185F), the camera will power off and stop record automatically to prevent any internal damage.
Using the SW011 Battery Charging Insert a memory card Adjust the positions of the lens Turn on and turn off Basic operations of the SW011 Change operating mode Setup menu System setting How to shoot Start / Stop shooting ...
Remove card: Push the card inside and the card will pop out. Then you can remove the card. Notice: When using the memory card for the SW011 for the first time, the format of the memory card may not compatible with the SW011, you must use the SW011 to format the memory card...
Adjust the positions of the lens The front lens of this SW011 can be turned 20 degrees up and down in order get the best view. Turn on and turn off Turn on: press power button once for a short while until red ON indicator lights up.
Start / Stop shooting: In the video mode, press OK key to start video, then press OK key again to stop video. When the SW011 is powered up or you insert a memory card, it will automatically start video recording.
/ unlock protection / choose to display size. Reset of this SW011 When abnormal circumstance occurs due to improper operation, you can press reset button and then restart the machine.
Page 15
• Battery - Built-in lithium polymer battery • System requirement - Windows 2000/XP/Vista/Windows 7,MAC OS x above 10.3.6 Note: We reserve the right to modify the SW011 design and specifications without notice. About the Manual We have tried to ensure that what is in this manual is correct and up to date. However, we can not guarantee that all content is correct without any errors.
Need help?
Do you have a question about the SW011 and is the answer not in the manual?
Questions and answers