10. Press [CLEAR] button on the remote control unit.
Fig. h appears on the screen.
" ******* " differ depending on the models.
MODEL
: *******
Version
: *.**
Region
: *
LD OPERATING TIME
TIME(DVD) : *:**
TIME(CD)
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set. Then the firmware renewal
mode is complete.
11. To exit this mode, press [POWER OFF] button.
: *:**
EXIT: POWER
Fig. h
15
DVD-1940CI/758