Table of Contents
Advertisement
1. If the instrument has been stored in unfavorable
conditions, place the instrument in a more favorable
climate before using.
2. When the transmitter is connected to the mains, if
the negative side of the transmitter is connected to
the protective ground phase, the current leakage
(if any) in the power supply line may combine with
the current of the transmitter, which may lead to
tripping the circuit breaker.
3. Keep the original packaging for future shipping
purposes (ex. calibration)
1. OVERVIEW
1.1 Product Introduction
This cable locator is a transmitter and receiver with advanced
integrated circuitry for a highly stable and reliable performing
meter. The transmitter sends a modulated AC digital signal
along the cable or pipe and moving the receiver along the path
of the cable or pipe to track it inside the wall.The receiver will
change tone based on the intensity of the signal received.
The transmitter also has built in AC/DC voltmeter capabilities
to display the voltage of the line being tested along with a
warning when testing live conductors.The cable locator is
useful in maintenance and construction/installation of
telecommunication lines, power lines and building pipelines.
07
1.2 Features
• Detecting cables, electrical lines, water/gas supply lines
buried in the wall/ground.
• Detecting breaks or shorts in cables and electrical lines
buried in the wall/ground.
• Detecting fuses and current directions.
• Detecting interruptions and short-circuits in floor heating;
• Integrated AC/DC voltmeter function to measure 12-400V.
• The sensitivity of the receiver can be adjusted manually or
done automatically.
• The receiver automatically detects the selected transmitted
signal.
• The receiver has a built in flashlight for use in dark areas.
• Both the transmitter and receiver have backlights for use in
dark areas.
08
Advertisement
Table of Contents
