Table of Contents
Advertisement
Attention
Please observe the following instructions to ensure safe
operation and optimal performace.
1)Preliminary Inspection
Check the meter and accessories thoroughly before use.
Contact your local distributor if the meter or any components
are damaged or malfunction.
WARNING
Follow all standard safety procedures regarding the
use of electrical testing instruments when using the
cable locator.
2)Placement
To avoid failures,please don't place the cable locator
under the following environments:
• Avoid direct exposure to sunlight to ensure extended life of
the meter.
• Do not place the meter in any environment with high
pressure, high temperature, dust, explosive gas or vapor.
• Do not place the meter near a strong magnetic field which
may cause false readings.
• Avoid placing the meter on any surface with a high
mechanical vibration.
03
3)Use
To prevent personal injury or damage to the meter
during use, the following safety instructions should
be carefully observed.
1. Follow all industrial safety codes to avoid electric shock
when using the meter on live circuits.
2. Always use caution when working with voltages above
60VDC or 30VAC rms. Keep fingers behind probe barriers
at all times.
3. Observe the polarity of the battery when changing.
Reversing the battery polarity can damage the meter and
cause a potentially dangerous situation.
04
Advertisement
Table of Contents
