Hide thumbs Also See for RunCam 3:

Advertisement

Quick Links

RunCam 3 User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RunCam 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RunCam RunCam 3

  • Page 1 RunCam 3 User Manual...
  • Page 2 WiFi/Mode Switch Button Camera Status Light Micro-USB Port Microphone 1 microSD Card Slot Microphone 2 Package Contents: Micro-USB Micro-USB TV-Out RunCam 3 X 1 Silicone Shell X 1 RCA Cable X 1 Cable X 1 and Power Cable X 1...
  • Page 3 · Charging The camera status lights (red) The RunCam 3 and battery are integrated. The camera status lights (green) blink when the battery drops below 15%. If the battery reaches 0% while recording, the camera saves the file and powers off.
  • Page 4 Windows OS. In the resource manager (Win + E) address bar enter "%appdata%/microsoft/windows/network shortcuts" to find it. If it's missing in your system, you can go to the following link to download and install: www.runcam.com/download/AmcapSetup.exe · Instructions for use: Powering on:...
  • Page 5 (blue) blink when the WiFi is on and ready to connect. 2. In the wireless network of your smart phone, find the SSID connection of the RunCam 3 and enter the password. After the successful connection, the WiFi status lights (blue) will be constantly on.
  • Page 6 Loop recording:The recorded video file will be divided into multiple segments (the length can be set to 1/3/5 minutes) to be written to the memory card. The camera continues to record at the beginning when the card is full, erasing the previously recorded material and replacing it with the new content.
  • Page 7 Firmware upgrade Firmware Upgrade Status (orange lights blink) Ensure that the RunCam 3 battery is more than 50% before the upgrade. Method 1 (recommended): Upgrade the firmware through App. Method 2: Manually copy the firmware file onto the microSD card. Follow the instruction on http://runcam.com/download/runcam3/...
  • Page 8 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents