IMPORTANT SAFETY INFORMATION
WARNING
installer or service technician.
IMPORTANT
DANGER
these instructions can be killed or seriously injured.
Before Installing the cooktop
1. Visually inspect the cooktop for damage.
Also make sure all cooktop screws are on tight.
2. Record the model and serial number as found
on the bottom of your cooktop. When ordering
parts for or making inquires about your cooktop,
always be sure to include the model and serial
numbers and a lot number or letter from the serial
plate on your cooktop.
3. Cutout dimensions of the countertop.
4. Make sure the wall coverings, countertop and cabinets
around the cooktop can withstand heat (up to 200°F) generated
by the cooktop.
5. Gently lower the cooktop into the countertop cutout.
NOTE: Do not seal the cooktop to the countertop,
the cooktop must be removable if service is necessary.
Electrical Connection
IMPORTANT
Model
TI-4B
needs 40 Amp service.
Maximum Connected Load
......7.4 kW at 240 VAC, 6.4 kW at 208 VAC
Model
TI-4B
Installation and service must be performed by a qualified
Read and save these instructions for future reference.
A
lways read and obey all safety information, failure to follow
Observe all governing codes and local ordinances.
Installation Instructions
17
Serial plate is located
the front of the cooktop.