Using The Cooktop 8 - True Induction TI-4B Use And Care Manual

Set Timer
The automatic timer settings range
from 1 minute to 99 minutes. (NOTE:
There is no "seconds" and "hours"
display, only minutes.) The red dot
next to the Time symbol indicator will
illuminate indicating that the cooking
elements is selected.
While cooking, touch the Timer key
pad until time light of the desired
cooking element is ON, Time digital
display reads "00" and blinking; Touch
"+" or "- " key to set the desired
number, Once the Timer is set and no
"+" or "- " key are pressed for 5
seconds, the Minute Timer begins the
countdown and the timer display will
stop blinking and will stay on in the
display. Once the Minute Timer
reaches "00", a "beep" will be sound,
indicating that the time is up, the
Particular Cooking Element will
automatically shut off.
Using The Cooktop
If you want to set another burner to
switch-off automatically, touch
Timer key to until the desired time
symbol indicator blinks, repeat the
same steps above.
If you want to check the remaining
time for another Cooking Element,
touch the Timer until the Time
symbol indicator for the desired
Cooking Element blinks.
If more than one switch-off time is
programmed, the shortest time
remaining will show in the Time
digital display, the indicator for that
particular burner will be blinking.
To Cancel Timer
Touch the Timer until the Time
symbol indicator for the desired
Cooking Element blinks, then
touch the "+" or "- " to set the timer
to 00. The Time digital display will
blink for 5 seconds and then turn
off, indicating that the timer of
selected cooking element has
been cancelled.
11