Table of Contents
Advertisement
5.3.2 Quick Setup Function set
The Quick Setup Function set is provided for easily and quickly configuring RAID set by
user. It contains two functions: Create One RAID and Delete All RAID. The introduction
is as follows:
Create One RAID: user can easily create a RAID from the existing disks by this function.
User only needs to select the created RAID level and input the RAID password, and then a
desired RAID set is configured. However, if user doesn't need RAID password, user can
directly press the
'Enter' key to bypass the RAID password stage and create a RAID set without password.
Delete All RAID: user can easily delete all RAID sets in the existing disks by this function.
User only needs to input the RAID password of the existing RAID sets, and then all the
RAID sets will
be deleted. If there's no password in the existing RAID set, user doesn't need to input the
password. Besides if there are more than two existing RAID sets with different passwords,
user cannot delete these RAID sets in this function. User can delete these RAID sets
separately in RAID Manager/Delete RAID function.
5.3.3 Disk Manager Function set
The Disk Manager Function set is provided for managing and displaying the whole
connected disks. It contains two functions: Identify Disk and Show Information. The
introduction is as follows:
Identify Disk: user can identify the disk number by this function. After user enters this
function and selects a disk number, the corresponding disk led (ready) will become slow
blinking and user
can know the mapping of disk number and disk position.
Show Information: user can see the disk information by this function. After user enters this
function and selects a disk number, user can see the model name, serial number, firmware
version, total capacity, free capacity, and disk state of the selected disk. The free capacity
means the space which can be used to configure as RAID disk.
14
Advertisement
Table of Contents
