Table of Contents
Advertisement
Connect ACT-ARS5050 TO PC
4.
4.1 Connect ACT-ARS5050I to pc
1.Open the pc case, insert ARS5050I,and connect two 4-PIN power cords to make
ARS5050I work well.
2.Connect a SATA cable to the SATA port of the system board.
3.Connect the other and of the SATA cable to ARS5050I.
4.Fasten with 12 screws, and close the pc case.
4.2 Connect ACT-ARS5050E/RE to pc
1.Insert one end of the ESATA cable into the eSATA port of the pc system, and the other
end into the eSATA port of ARS-5050E/RE.
2.Connect the power cord.
Once installing successfully, you can find ARS5050 as a non-initial Disk in
〝Disk manager〞under〝my computer〞and then to Format this Disk.
11
Advertisement
Table of Contents
