Radar Display Indicator; Operational Controls; Function Selector - Cp-113K Control Panel - Telephonics RDR-1600 Pilot's Manual

System Configuration (Cont.)

2.2 RADAR DISPLAY INDICATOR

Figure 2.2-1. MFD Display
The MFD displays green, yellow and red moving maps of weather and
surface features.
Rainfall per hour Ground Return
0-1 mm No significant return
1-4 mm Light
1-12 mm Medium
12 mm or more Heavy
The choice of two weather modes, three search modes and antenna scan
of 60 or 120 degrees is selected by the pilot. A target alert feature is active
in the weather alert mode, and a movable track cursor helps the pilot plan
his flight around severe weather. A beacon mode enables the display of
beacon locations and a code feature identifies the beacons. Beacon
Formatting allows for the display of either standard or DO-172 type
beacons. This information can be displayed in any of eight separate ranges.
4 RDR-1600 Pilot's Guide
Color
Dark
Green
Yellow
Red
TM106101(8/01)

3.0 OPERATIONAL CONTROLS

3.1 FUNCTION SELECTOR – CP-113K CONTROL PANEL
OFF Removes system power.
STBY System is operationally ready; no display.
TEST Displays a test pattern without transmitting, identified by
TEST and RT FAULT.
ON System transmits in normal operation.
60° Directs the antenna to sector scan 60° about the boresight
of the aircraft. This position will work in weather, search
(map), and beacon modes.
Figure 3.1-1. CP-113K Control Panel
RDR-1600 Pilot's Guide
TM106101(8/01)
Operational Controls
5