Electric Park Brake (Epb) - Fiat 500x User Manual

Hide thumbs Also See for 500x:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE
Max Defrost
Push the MAX Defrost button to change the current airflow setting to Defrost mode.
Performing this function will cause the blower speed to increase to high blower, the
A/C compressor to turn on, the driver and passenger temperatures set to HI, rear
defroster to turn on, and recirculation to turn off.
If the MAX Defrost button is toggled off, the climate system will return to the previ-
ous setting.
SYNC
Push the SYNC button to synchronize the passenger temperature setting with the
driver temperature setting.
Changing the passenger temperature setting while in Sync will automatically exit this
feature.
Mode Buttons
The airflow distribution modes can be adjusted so air comes from the instrument panel,
floor, de-mist, and defrost outlets. One, two or all modes may be selected at any one
time.
Heated Mirrors
The mirrors are heated to melt frost or ice. This feature is activated whenever you turn
on the rear window defroster.

ELECTRIC PARK BRAKE (EPB)

Your vehicle is equipped with a new Electric Park Brake System (EPB) that offers greater
convenience. The EPB switch is located in the center console.
To apply the park brake manually, pull up
on the switch momentarily. Once the park-
ing brake is fully engaged, the BRAKE warn-
ing lamp in the instrument cluster and an
indicator on the switch will illuminate.
To release the park brake manually, the
ignition must be in RUN. Then put your
foot on the brake pedal and push the park
brake switch down momentarily. Once the
park brake is fully disengaged, the BRAKE
warning lamp and the switch indicator will
extinguish.
70
Park Brake Switch

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents