Fiat 500x User Manual page 54

GETTING STARTED
Height Adjustment
The front driver and passenger seats height can be raised or lowered by using a lever,
located on the outboard side of the seat. Pull upward on the lever to raise the seat
height or push downward on the lever to lower the seat height.
Recline Adjustment
To adjust the seatback, lift the lever located on the outboard side of the seat, lean back
to the desired position and release the lever. To return the seatback, lift the lever, lean
forward and release the lever.
Power Adjustment Front Seats — If Equipped
The power seat controls are located on the outboard side of the seat, close to the floor.
Use the switch to move the seat up/down, forward/rearward, tilt if equipped and to set
the angle of the seatback.
Forward Or Rearward Adjustment
The seat can be adjusted both forward and
rearward. Push the seat switch forward or
rearward, the seat will move in the direc-
tion of the switch. Release the switch when
the desired position has been reached.
Height Adjustment
The height of the seats can be adjusted up
or down. Pull upward or push downward
on the seat switch, the seat will move in
the direction of the switch. Release the
switch when the desired position is
reached.
Recline Adjustment
Push the seat recliner switch forward or
rearward, the seatback will move in the
direction of the switch. Release the switch
when the desired position has been
reached.
Tilt Adjustment
The angle of the seat cushion can be adjusted up or down. Pull upward or push down-
ward on the front of the seat switch, the front of the seat cushion will move in the di-
rection of the switch.
Power Lumbar Adjustment
Push the switch forward or rearward to increase or decrease the lumbar support. Push
the switch upward or downward to raise or lower the lumbar support.
52
Power Seat Switches
1 — Power Seat Switch
2 — Power Recline Switch
3 — Power Lumbar Switch