Garmin GDL 88 Installation Manual page 27

Wire Gauge
Garmin P/N
Military P/N
AMP
Positronic
ITT Cannon
[1] For configuration module pins, ensure that the crimp tool is set to crimp 28 AWG wire
(indenter setting of „4‟).
[2] Contacts listed are not to be used for configuration module wiring. Use the contacts
supplied with the configuration module when installing configuration module wires in
P1001.
[3] Non-Garmin part numbers shown are not maintained by Garmin and are subject to
change without notice.
GDL 88 TSO Installation Manual
190-01122-00
Table 4-4. Socket Contact Part Numbers
Configuration Module
78-pin Connector (P1001)
28 AWG [1]
336-00021-00
N/A
N/A
N/A
N/A
P1001-P1005
22-28 AWG [2]
336-00021-00
M39029/58-360
204370-2
MC8522D
010-2042-000
Page 4-5
Rev. A