Table of Contents
Advertisement
Securing with double-sided tape only
Note:
R Make sure any surfaces that will make contact with the double-sided tape are
clean and dry before applying the tape. When attaching the double-sided tape to
concrete or bricks, if the surface of the concrete or bricks is wet, make sure to
completely dry the surface before attaching the double-sided tape.
1
Remove the backing from the double-sided tape, attach the main unit and the
probe unit to the installation surface, and then press firmly on each unit to
ensure solid adhesion to the installation surface.
1
Note:
R To install the probe unit on a floor, see page 18.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
HNS103EX_(en_en)_0111_ver.105.pdf
Double-sided tape
1
1
1
17
Setup
17
2017/01/11
18:37:55
Advertisement
Table of Contents
