Advertisement
Quick Links
Advertisement
Related Manuals for Spromise S100
Summary of Contents for Spromise S100
- Page 1 Trail Camera User’s Manual (for S100/S108/S120/S128) PLEASE READ CAREFULLY BEFORE USING CAMERA...
- Page 2 Package Contents Mounting Strap Trail Camera Antenna(wireless USB Cable camera only) User’s Manual Camera Body and Ports Antenna Port...
- Page 4 Keys & Buttons • MENU: Enter the program menu in preview mode • ▲▼◄►: Move between the menu items and change the value • o Save parameter settings in menu mode o Play videos in playback mode • Playback button : In live preview window, switch between playback and preview mode •...
- Page 5 Quick Start Make sure the power switch is at OFF position. Load the batteries into the battery compartment according to the polarities indicated. Load a set of 12 (recommended), 8 or 4 (emergency, left 2 columns) batteries. Or connect 6 V external power supply to the camera by using the correct cable and external battery.
- Page 6 Press button to enter into the menu, then press ◄ or ► buttons to move between the tabs (submenu) which contains different group of items. Press the ▲ or ▼ buttons to activate the submenu and edit different items. Press ◄► to change the value. Press the OK button to save.
- Page 7 Please note that even in the OFF mode, the camera still consumes a small amount of battery power. Therefore, please remove the batteries if the camera is not in use for an extended time. Menu Settings Switch the camera to SETUP mode & press MENU. Press ▲▼◄► to select the desired value, And then press OK to save.
- Page 8 The camera can be triggered by timer at a preset time interval. Please note that even in Time Lapse mode, the camera still can Time Lapse be triggered unless the Sensitivity is set to OFF. The camera can be set to operate only at specific time period.
- Page 9 This option allows a 6 digits password to be Password set. Choose the menu language. Language Choose to send the image Instantly, just send the Daily report or just turn the Send Mode wireless function Off. Send the images to Phone, Email or Both. Send To Choose to send the image via MMS (MMS Send Via...
- Page 10 Download the Setup Tool to your SD card so you can set up the carrier’s network parameters if they are not pre-programmed Setup Tool to the camera. It will also allow user to set up some advanced functions. Copy the current network parameter Copy Para settings to the SD card.
- Page 11 How to use the Setup Tool（wireless camera only） If your wireless carrier’s network parameters are not pre-programmed into the camera from the factory, you will need to use the Setup Tool to program them into the camera manually. Go to the camera Menu > Wireless > Setup Tool. Download the Setup Tool to your SD card from the camera menu.
- Page 12 Figure out the sending Email type before choose...
- Page 13 Technical Specifications Picture Resolution 8MP/5MP/3MP 720p @30fps / WVGA (800*480@30FPS) / QVGA Video Resolution (320*240@30FPS) / 1080p @10fps Trigger Time Lens FOV (Field of View) = 52° Night Illumination Infra Red or No Glow Display Screen 2.0” LCD Memory Card up to 32GB Trigger Motion (PIR) / Timer (Time Lapse)
- Page 14 SMS Command Code List(wireless camera only) Add Phone *100#number# Phone number added Delete Phone *101#number# Phone number deleted Add Email *110#email# Email added Delete Email *111#email# Email deleted Send Via MMS *120#0# Send via MMS Send via Internet (When send Send Via Internet *120#1# via is Internet, "Send To"...
- Page 15 Set PIR Level to *202#0# PIR sensitivity high High Set PIR Level to *202#1# PIR sensitivity normal Normal Set PIR Level to Low *202#2# PIR sensitivity low Set PIR Level to Off *202#3# PIR sensitivity off Picture sending ("Invalid" when Take Photo and *500# the camera mode is Video or...
- Page 16 Notes If you want to use the camera as a non wireless camera without SIM card, please make sure Send mode is off, SMS control is off. When reaches the Max Num, Sending will be stopped; it would restart to send from the next day, or you can reset the Max Num by SMS command.