SecuPlate ELKITW2G Quick Installation Manual page 5

Step 2: Registering Kit Components
All components must be registered in order to be recognized by the
system.
Your kit comes with pre-registered components. Activate the
components to complete the registration process.
To activate the detectors:
• One-at-a-time, open each detector (see detector illustrations
on pages 7 and 10), and then do the following:
a. Remove the red plastic divider (battery protector strip) to
power-up the detector; a chime sounds indicating the
control panel has recognized the detector.
b. Immediately put the detector cover back on, so as not to
sound the tamper alarm. If the tamper alarm does sound,
enter the default master code (1234) to silence it.
To activate the keyfob:
• Press any keyfob button; a chime sounds indicating the
control panel has recognized the keyfob.
NOTE: If a tamper alarm sounds
during this procedure, enter the
default master code (1234) to silence it.
5