SecuPlate ELKITW2G Quick Installation Manual page 4

To power-up the control panel:
1. Apply electrical power to the control panel with the AC
power cable, or at the circuit breaker switch; SELECT
LANGUAGE displays on the keypad.
2. Now select the language you wish to display at the control
panel. Use
press
3. Press
INITIALIZING, and then DISARMED display.
NOTE: If "LOW BATTERY," "SYSTEM NOT READY,"
"SYSTEM TROUBLE" or "TAMPER ALARM" display, there
are trouble messages (use
However, these usually resolve automatically after performing
all 4 system installation steps.
to scroll to the language, and then
.
to set for www.MyELAS.com (default);
to scroll and view them).
4