7.4.6. SKYGLASS CONTROL BLOCKS VISUALIZATION
Δ
By pressing
key after taximeter control blocks visualization.
O
By pressing
key or after few seconds it switches to FOR HIRE.
7.4.6.1.
E.1
Serial number.
Press
key to go to the next visualization, or automatically after few seconds:
- E.1
Skyglass serial number
- E.2
Software version
- E.3
Hardware version
- E.4
Checksum
+
Press
key to print the control blocks.
Once the blocks visualization is completed, the taximeter goes to for hire automatically.
Skyglass_EN.002.docx
BLOCKS VISUALIZATION
25