Specifications - Kenwood KRF-V5200D Service Manual

AUDIO section
Rated output power during STEREO operation
(63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω) ................ 100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ........................... 120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .... 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ..... 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ...................100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ....................120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .... 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ..... 120 W + 120 W
Total harmonic distortion .......................... 0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF'66)
CD/DVD ..................................... 20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF'66)
CD/DVD .............................................................................. 100 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 ....... 550 mV / 40 kΩ
AV AUX .................................................................. 550 mV / 50 kΩ
DVD/6CH INPUT .................................................... 550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ............................550 mV / 470 Ω
PRE OUT (SUBWOOFER) ....................................... 1.5 V / 1.5 kΩ
Tone control
BASS ................................................................±10 dB (at 100 Hz)
TREBLE ............................................................±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / wave length
Optical ................................ –15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ....................................................................0.5 Vp-p / 75 Ω

SPECIFICATIONS

VIDEO section
VIDEO inputs / impedance
VIDEO (composite) ....................................................1 Vp-p / 75 Ω
VIDEO outputs / impedance
VIDEO (composite) ....................................................1 Vp-p / 75 Ω
COMPONENT VIDEO inputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ................................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ..................0.7 Vp-p / 75 Ω
COMPONENT VIDEO outputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ................................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ..................0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range ................................. 87.5 MHz – 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO ........................ 1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ..................... 45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO ........................................................... 0.2% (71.2 dBf input)
STEREO ....................................................... 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ....................................65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ................................60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ................................................. 36 dB
Selectivity (DIN ±300 kHz) ....................................................... 64 dB
Frequency response (30 Hz – 15 kHz) .................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range .................................... 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) ............16 µV / (600 µV/m)
Signal to noise ratio (30% mod.) ............50 dB (60 dBµV EMF input)
General
Power consumption ..................................................................250 W
Standby power consumption ..................................... less than 0.6 W
Dimensions ......................................................W: 440 mm (17-5/16")
..........................................................................H: 159 mm (6-1/4")
........................................................................D: 343 mm (13-1/2")
Weight (net) ................................................................8.1 kg (17.9 lb)
Notes:
1. Kenwood follows a policy of continuous advancements
in development. For this reason specifications may be
changed without notice.
2. The full perfor mance may not be exhibited in an
extremely cold location (under a water-freezing
temperature).
KRF-V5200D
39