Using The Optional Wall-Mount Bracket - Sony BRAVIA KD-75X9400E Reference Manual

Using the optional Wall-Mount Bracket

This TV's instruction manual only shows the steps on preparing the installation of the TV before
installing to the wall.
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your
TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of
this product.
This product should only be installed by a professional installer who is trained to determine the strength of
the wall for withstanding the TV's weight. If it is not properly secured during installation, the TV may fall and
cause serious injury. Sony is not liable for any damage or injury caused by mishandling or improper
installation, or installing any other than the specified product. Your Statutory Rights (if any) are not affected.
Use the Wall-Mount Bracket SU-WL500 (not supplied) (KD-75X9400E) or SU-WL450 (not
supplied) (KD-65/55X9300E) to install the TV to the wall.
When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation
Guide supplied with the Wall-Mount Bracket.
Note
• Be sure to store the removed screws in a safe place, keeping them away from children.
1
Remove the stand cover and terminal covers.
KD-75X9400E
4
2
1
2
Remove the screws from the rear of the TV.
KD-75X9400E
14
GB
KD-65X9300E
3
1
KD-55X9300E
5
4
2
3
KD-65/55X9300E
3
5
4
2
1