Clear; Instrument Select; Shift - Roland Aoutique TR-09 User Manual

PROGRAMMING A FLAM
FLAM may be entered only for BASS DRUM, SNARE DRUM, LOW TOM, MID TOM, and HI TOM.
This operation is best when applied in STEP WRITE MODE.
1. Hold down [INSTRUMENT SELECT] and press one of the MAIN KEYS which reflect the intstrument you wish to
FLAM. Press BOTH of the instrument's MAIN Keys in order to define the FLAM entry. So for example if you were
going to FLAM the bass drum, when selecting the instrument you would choose both MAIN KEY 1 and MAIN KEY
2 at the same time. In effect you then have selected a FLAMMED BASS DRUM as the instrument.
2. In PATTERN WRITE mode, wiht the sequencer running select which step the FLAM will happen on
3. Hold down the [SHUFFLE/FLAM] button and press the FLAM keys [9-16] and select the spacing you like best.
Higher numbers produce greater spacing, and you can also use the TEMPO knob to refine the details.

CLEAR

The clear button is used for clearing the current pattern or track. Doesn't do anything when you are in PATTERN or
TRACK PLAY mode.
To clear a pattern enter PATTERN WRITE mode
Hold [SHIFT] and press the PATTERN or TRACK bank you want to erase in. The bank button blinks, indicating that
you are in WRITE mode.
Clearing a pattern
Hold down the [CLEAR] button and press one of the main keys [1]–[16] to select the pattern that you
want to clear.
Holding down [CLEAR] and pressing all of the patterns you want to clear is a fast way of preparing a bank for new
patterns.

INSTRUMENT SELECT

This is how you select which sound the current grid is programming.
Hold down the [INSTRUMENT SELECT] button and press one of the main keys [1]–[16] to select the sound that you
want to record.
NOTE - To select the Open Hi Hat press both [13] and [14] (similar to how we program the FLAM.)

SHIFT

The SHIFT key actis as a modifier key so that some of the keys may perform secondary functions.
[SHIFT] + [TRACK PLAY] = TRACK WRITE MODE
[SHIFT] + [PATTERN PLAY] = PATTERN WRITE MODE
[SHIFT] + [COMP] = EDIT MODE
[SHIFT] + [TEMPO] = PATTERN WRITE MODE STEP
[SHIFT] + [BACK] = PATTERN WRITE MODE TAP
[SHIFT] + [FWD] = BANK I
[SHIFT] + [AVAILABLE MEASURE] = BANK II
[SHIFT] + [CYCLE/GUIDE] = LAST MEASURE
[SHIFT] + [INSTRUMENT SELECT] + [ENTER] = SOLO/MUTE
[CLEAR] + [SHIFT] + [INSTRUMENT SELECT] = CLEAR ALL MUTE/SOLO
13