Advertisement
system but not unregister from the device.
3. To format/delete all user's Mobile Number "Device Code F" (Exp.
Like device code is SG12 then we have to send SG12 R" ) from the
mobile of admin user. The First user/ admin can format the system
only.
Note: Before configuring makes sure that there is sufficient balance in the SIM for
SMS or SMS pack shall be activated for reply of commands. For usage also there
shall be sufficient balance for SMS and call.
Sensors Configuration
We can add up to 8 Sensors at One Smart Guard Device from S01 to S08
with customize message with particular Sensor. Example: For adding Shutter
Sensor, Send SMS "Device Code S01 Tamper Shutter 1 at Pizza Shop#" [
Note S01 to S08 is Fixed after you can add custom message for Sensor up to
50 character, at end put #], Once you get message from Device for active
Sensor to save sensor ID, use/ activate that particular sensor .
Location Configuration
We can add Smart Guard Device location with customize message. Example:
For adding location, Send SMS "Device Code LO ALERT FROM Pizza
Shop#" [add custom message for location up to 100 characters, at end put #].
Other Information
1. To check all user nos. stored in device "Device Code N" from the
mobile of any registered user. 1st user in the list will be mater user.
2. To check Signal Strength of device "Device Code ST" from the mobile
of any registered user. Best Signal from 10 to 14 OK, 15 to 19 Good,
20 to 30 Excellent.
3. To check Balance of device's SIM "Device Code B"USSD code"" from
the mobile of any registered user.
How to Use Smart Guard & How it works
Version 1.1
3
Advertisement
