Page 2
Turning on Smart Guard 1. Open Smart Guard with the help of screw driver. 2. Insert SIM card in Sim Holder, slide to lock. 3. Insert Battery wire into battery port into board. 4. Smart Guard LED Blink to indicate Smart Guard On.
SMS and call. Sensors Configuration We can add up to 8 Sensors at One Smart Guard Device from S01 to S08 with customize message with particular Sensor. Example: For adding Shutter Sensor, Send SMS “Device Code S01 Tamper Shutter 1 at Pizza Shop#” [...
Page 4
4. For Playing Hooter Press D/Alarm Button from Remote, instantly Hooter will ON, for off again Press D button from Remote. 5. Smart Guard is Activated and any intruder tries to tamper (open) the any configured Sensor(E.g. Door/Shutter Sensor) for just an inch then...
Page 5
2. We have to use adopter to provide power .If there is no power, there is a rechargeable battery inside the device that can provide power backup minimum 24 hrs. 3. Door/Shutter/other sensor battery works minimum 4 months. What “Smart Guard” Package includes :- Version 1.1...