Advertisement
Turning on Smart Guard
1. Open Smart Guard with the help of screw driver.
2. Insert SIM card in Sim Holder, slide to lock.
3. Insert Battery wire into battery port into board.
4. Smart Guard LED Blink to indicate Smart Guard On.
5. Wait for few seconds.
6. Device will give beep for ready to use.
7. Close Smart Guard Screws.
8. Plug-in Hotter wire into Smart Guard.
9. Plug-in 12 Volt Adapter cum Charger.
Smart Guard Configuration
1. To register the user no. "Device Code R"(Exp. Like device code is
SG12 then we have to send SG12 R" ) from the mobile which has
to be registered. We can register up to 6 users maximum. The First
user registered will be the admin who has right to format all the
users in device.
2. To unregister the user no. "Device Code U" (Exp. Like device code
is SG12 then we have to send "SG12 U" ) from the mobile which
has to be unregistered. The First user admin can only format the
Version 1.1
2
Advertisement
