Starting Your Washer - Whirlpool design 2000 LA5700XP Use & Care Manual

Starting
your washer
1 Measure and add detergent
Before starting your washer. 2. Place sorted load in washer.
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2.
TEMPERATURES
. Turn the knob to point at a setting
that descrtbes the size of load you
want to wash
l
Set the knob on or between
EX SMALL [a few items] and
LARGE (a full load].
NOTE: Use the LARGE water level
Recommended wash temperatures
for best permanent press results.
can be found in your "Laundry Guide:'
l
Match the wash and rinse water
temperatures to the type of fabrics
and SOAS being washed
l
This drawing shows a warm wash
(top temperature) and cold rinse
[bottom temperature) selectlon
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
0
CAUTION:
in the water. Too big a load or too
DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing of load items.
'Approximate
fill with load.
(17.3 galsJ65.5 L)'
(14.7 galsJ55.7 L)'
(12.1 galsJ45.8 L)'
EX-SMALL (9.5 gals./36.0 L)'
A