Table of Contents
Advertisement
OPERATION OF EASY MODE
1. At Time Mode, press Button
2. Display the current heart rate per minute.
Note!
For better performance, it is recommended that the
user puts the ring on one finger which fits best, so that
measurement accuracy will not be affected by the sway of
the ring because of improper fitness and/or vehement
movement.
Slightly clench the fist to keep a stable measurement
if necessary. (Refer to Page 13)
No Heart Rate Signal Detected
Easy Mode for measurement of heart rate.
At Easy Mode, only the measured heart rate
per minute along with the real time heartbeat
icon are displayed.
As shown at left, the ring is starting to detect
heart rate.
Press Button
C
measurement.
As shown at left, the current heart rate is
72 beats per minute.
As shown at left, the heart rate cannot
be detected because improper fit.
When heart rate signals are not detected by
the device for 30 seconds continuously,
operation mode will be switched to Time
Mode by the system.
To continue measurement, please put on the
ring properly and press Button
Easy Mode again.
C
to activate
to terminate heart rate
C
07
to activate
Advertisement
Table of Contents
