First Use (Time Setting Mode) - LifeSpan digital ring Owner's Manual

FIRST USE (Time Setting Mode)

The default time on the ring is 00:00 00. To set the time
follow the steps below.
At Time Mode, continuously press Button A for 2 seconds to
enter Time Setting Mode.
1. Hour Setting (12-hour clock system)
2. Minute Setting
3. Second Setting
Press Button C
Press Button B
Press Button A to enter the next step.
Press Button C
Press Button B
Press Button A to enter the next step.
Press Button C
Press Button B
Press Button A to enter the next step
to increase.
to decrease.
to increase.
to decrease.
to reset to 00.
to reset to 00.
05