Table of Contents
Advertisement
AUDIO SETTINGS
BASS BOOST
LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5 or LV1/LV2/LV3/LV4/
LV5: Selects your preferred bass boost level. ; OFF: Cancels.
LOUDNESS
LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ; OFF: Cancels.
SUBWOOFER SET
ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE
L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET
–15 to +6 (0): Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Not applicable for RADIO source and AUX source.)
(Sound
ON: Creates realistic sound by compensating the high-frequency
reconstruction)
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
SPACE ENHANCE
(Not applicable for RADIO source.)
SMALL/MEDIUM/LARGE or SML/MED/LRG: Virtually enhances the
sound space. ; OFF: Cancels.
SND REALIZER
LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Virtually makes the sound
more realistic. ; OFF: Cancels.
STAGE EQ
LOW/MIDDLE/HIGH or LOW/MID/HI: Virtually adjust the sound
position heard from the speakers. ; OFF: Cancels.
DRIVE EQ
ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
Depending on the crossover type you have selected ( 5), 2-way
SPEAKER SIZE
crossover or 3-way crossover setting items will be shown ( 23).
X'OVER
By default, 2-way crossover type is selected.
22
ENGLISH
DTA SETTINGS
For settings,
24, Digital Time Alignment Settings.
CAR SETTINGS
•
: For 2-way crossover: [SUB-W LEVEL]/[SUBWOOFER SET] is selectable
only if [SWITCH PREOUT] is set to [SUB-W]. ( 4)
• [SUB-W LEVEL] is selectable only if [SUBWOOFER SET] is set to [ON].
Crossover settings
Below are the available setting items for 2-way crossover and 3-way
crossover.
SPEAKER SIZE
Selects according to the connected speaker size for optimum performance.
• The frequency and slope settings are automatically set for the crossover
of the selected speaker.
• When 2-way crossover is selected, if [NONE] is selected for [TWEETER] of
[FRONT], [REAR] and [SUBWOOFER] for [SPEAKER SIZE], the [X ' OVER] setting of
the speaker is not available.
• When 3-way crossover is selected, if [NONE] is selected for [WOOFER] of
[SPEAKER SIZE], the [X'OVER] setting of [WOOFER] is not available.
X ' OVER
• [FRQ]/[F - HPF FRQ]/[R - HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts the
crossover frequency for the selected speakers (high pass filter or low
pass filter).
If [THROUGH] is selected, all signals are sent to the selected speakers.
• [F - HPF SLOPE]/[R - HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/[LPF SLOPE]/[SLOPE]:
Adjusts the crossover slope.
Selectable only if a setting other than [THROUGH] is selected for the
crossover frequency.
• [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be in
line with the other speaker output.
• [GAIN LEFT]/[GAIN RIGHT]/[F - HPF GAIN]/[R - HPF GAIN]/[SW LPF GAIN]/[GAIN]:
Adjusts the output volume of the selected speaker.
Hide quick links:
Advertisement
Table of Contents
