Table of Contents
Advertisement
ATTENTION:
In case ID-Code remote setting fails, repeat the instructions above within 4
minutes.
ID-Code remote setting is available for ID Code only. It will not change
function settings.
Within the operating distance, all same model systems on the same frequency
will be paired with the transmitter's ID Code.
A jumper added inside the receiver is necessary to enable the ID-Code remote
setting function.
Model 5008
Remote Control Systems
200, 400, and 500 Series
Remotes-0214
2721 NE 4th Ave Pompano FL 33064 | (954) 367-6116
ID-Code Remote Setting (continued)
Jumper to add for ID-
Code remote setting
Model 50011
Visit WWW.ACIHOIST.COM for the most current information
PAGE: 19
Advertisement
Table of Contents
